This is our LED crystal film screen installation method. If you are interested, you can find us on our official website at http://www.ledscreen-display.com
LED Crystal Film Screen Installation Guide

1. Preparation:
Surface Cleaning: Ensure the installation surface (e.g., glass, transparent acrylic) is clean, dry, and free of dust or debris. Use a soft cloth and mild cleaning solution if necessary.
Measurement and Planning: Measure the installation area to determine the correct size and placement of the LED Crystal Film Screen. Mark the area with non-permanent markers or masking tape.
2. Screen Placement:
Positioning: Carefully align the LED Crystal Film Screen with the marked area. Ensure the screen is level and centered for optimal visual impact.
Peeling the Backing: Gradually peel off the protective backing from the adhesive side of the screen, exposing the adhesive layer.
3. Application:
Smooth Application: Start from the top, gently press the screen onto the surface, working your way down. Use a squeegee or soft roller to smooth out any air bubbles and ensure a firm bond.
Edge Sealing: For outdoor or high-moisture environments, apply a clear silicone sealant along the edges of the screen to prevent moisture infiltration and enhance durability.
4. Electrical Connection:
Connecting Power: Locate the power and data connectors on the LED Crystal Film Screen. Connect them to the corresponding power supply and control unit.
Testing: Power on the screen and verify that all sections are functioning correctly. Adjust brightness and contrast settings as needed.
5. Final Adjustments:
Trimming (if necessary): If the screen needs to be adjusted to fit the installation area perfectly, carefully trim the edges using a sharp blade or scissors.
Final Inspection: Inspect the screen to ensure it is securely attached, free of air bubbles, and properly aligned.
6. Content Setup:
Loading Content: Use the provided software or remote control to upload and configure the display content. Ensure the content is optimized for the screen’s resolution and transparency.
7. Maintenance Tips:
Regular Cleaning: Clean the screen with a soft, dry cloth to remove dust. Avoid using harsh chemicals or abrasive materials.
Periodic Inspection: Check the edges and connections periodically to ensure they remain secure and functional.